QMARK® MUH0321

QMARK® MUH0321 Horizontal/Downflow Unit Heater, 7.5/10.2 Btu/hr Capacity, 208/240 VAC, 11/12.5 A, 60 Hz, 2.2/3 kW

Price: loading
Product Information:

Additional Specifications

QMARK® MUH0321

QMARK® Unit Heater, Horizontal/Downflow, Series: MUH, 7.5/10.2 Btu/hr Capacity, 208/240 VAC, 11/12.5 A, 60 Hz Frequency, 2.2/3 kW Power, 350 cfm, 27 deg F Speed, 27 deg F, Horizontal/Vertical Mounting, 8 ft Horizontal/9 ft Vertical Mounting Height, Heavy Gauge Die Formed Steel, Polyester Powder Coated, 16 in H x 14 in W x 7-1/2 in D Dimensions

Amperage Rating      :      11.0/12.5 A
Temperature Rating      :      27 deg F
Material      :      Heavy Gauge Die Formed Steel
Series      :      MUH
Flow Rate      :      350 cfm
Frequency Rating      :      60 Hz
Type      :      Horizontal/Downflow
Voltage Rating      :      208/240 VAC
Mounting Height      :      8 ft (Horizontal), 9 ft (Vertical)
Mounting Type      :      Vertical/Horizontal
Finish      :      Polyester Powder Coated
Capacity      :      7.5/10.2 Btu/hr
Dimensions      :      16 in H x 14 in W x 7-1/2 in D
Power Rating      :      2.2/3.0 kW
  • pdf Installation Instructions https://www.turtle.com//ASSETS/DOCUMENTS/ITEMS/EN/QMARK_MUH0321_Installation_Instructions.pdf
  • pdf Specification Sheet https://www.turtle.com//ASSETS/DOCUMENTS/ITEMS/EN/QMARK_MUH0321_Specification_Sheet.pdf
  • pdf Specification Sheet-1 https://www.turtle.com//ASSETS/DOCUMENTS/ITEMS/EN/QMARK_MUH0321_Specification_Sheet_1.pdf
  • pdf Specification Sheet https://www.turtle.com//ASSETS/DOCUMENTS/ITEMS/EN/https://cdn-assets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/QMARK_MUH0321_Specification_Sheet.pdf
  • Heavy gauge die-formed steel housing, two-toned, smartly styled
  • Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation
  • Specially designed venturi outlet to meet that added throw as required in vertical position
  • Branch circuit fusing
  • Completely enclosed fan motor
  • Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation
  • Automatic reset linear thermal cut-out, capillary type, provides protection over entire length of element areas (Manual reset protection available on made-to order basis)
  • 2 speed fan selector switch
  • Fan delay feature eliminates cold drafts
  • Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off
  • Ruggedly built, yet lighter weight for easier installation, no piping flutes, valves or traps
  • Individually adjustable discharge louvers to control air flow
  • Choice of optional diffusers for variety of air patterns, maximizing heat concentration and coverage in the vertical position
  • 240 V contactor coil voltage
  • AWG 12 wire size
  • 1 - 100 HP fan motor
  • 1600 rpm fan motor speed
  • 27 lb weight
  • 1 phase
  • 12 in air throw Horizonta