Problem solving is an opportunity for us to do our best by finding better ways to approach your unique project. We work as a team to build momentum, we tackle every challenge along the way, and we share a clear vision of our mutual success at the end of the road.
As a solutions provider, we have vast technical expertise across several market verticals. We follow a systematic approach to identify customer challenges, develop innovative solutions, and ensure that they are expertly planned and flawlessly implemented.
We live by a set of Core Values, which defines who we are. We pledge to listen, learn and be helpful to every customer need; to act honorably and always deliver as promised. Our teams are dedicated to technical excellence so that we can work intelligently to find the right solutions for our customer's needs.
The LevNet RF™ Decora® Rocker 902MHz Wall Switch Receiver (WSS20) features a robust rocker (return-to-neutral) manual switch used to toggle the lighting load ON or OFF. Using EnOcean® technology, but upgraded to the proven 902MHz radio frequency, the WSS20 leads the industry in quality and reliability. The WSS20 is compatible with all Leviton 902 MHz EnOcean-enabled self-powered transmitters. The WSS20 is the optimal solution for retrofit applications where incandescent, fluorescent and low-voltage lighting controls are required. The WSS20 replaces a traditional single-pole wall switch and fits in a standard single-gang wall box. No additional wiring is required.
LevNet RF™ Decora® RF Receiver Switch, 902 MHz, 120/230/277 VAC Control, < 1/2 W, Wall, 32 to 104 deg F Operating, Environmental Conditions: 0 to 95% Non-Condensing RH, 2.69 in H x 1.66 in W x 1.34 in D
Decora® design aesthetics - intuiative rocker switch with return-to-center design
No new wiring required - the LevNet RF wall switch receivers simply replaces the existing light switch and communicates with self-powered switches and sensors via radio 902 MHz frequency
Vacancy switching - provides pushbutton manual-ON/off light switching of each light load at any time
Maximize energy savings - when paired with LevNet RF™ PIR occupancy sensor, the LevNet RF™ wall switch receivers contain all sensor settings
Manual-ON/auto-ON, auto-ON/auto-OFF, walk through timer, auto time out selections of 2 minutes for testing (10/20/30 minutes)
Allows flexibility and customized adjustments to maximize energy savings
Presentation/viewing mode - turn lights off and keep them off while room is occupied (i.e. for slide or film presentations), automatically returns to normal when manually switched back on or room becomes vacant and time delay expires
Walk-thru feature - maximizes energy savings by assuring a 2.5 minute time out if motion is not present after 2.5 minutes in auto-ON mode
Standard size for seamless installation - LevNet RF wall switch receivers fit in a standard single gang wall box
Required wiring - neutral and non-neutral models available, non-neutral requires 25 W minimum load
Zero-cross relay - switches at the zero crossing point of the AC power curve to ensure maximum contractor life and compatibility with electronic ballasts
Energy savings and efficiency - lowest power consumption of any RF device - < 1/2 W per 120 V device and < 2/3 W per 277 V device annually - approximately 70% savings over other RF devices
Air gap switch - assures A/C power disconnects for safety on no neutral switch
10 A load rating - for commercial lighting circuits
EnOcean® technology enabled - for LevNet RF™ communication from self-powered lighting controls
Stores up to 20 transmitter IDs
50 to 150 ft range
Form C latching relay output channels
Rocker, momentary and toggle button pairing modes
30 seconds vacancy confirmation
800 W at 120 V incandescent, 1200 VA at 120V, 2700 VA at 277 V fluorescent ballasts, 400 W at 120 V LED, 1/4 hp at 120 V motor and 25 W minimum load required (non-neutral)
Line - black, load - blue and neutral - white wire designation
Availability By Branch
An Email Id is required to process your orders. Please enter your email id and click update.