Decora® LevNet RF™ WSS20-G9N

LevNet RF™ Decora® WSS20-G9N RF Receiver Switch, 902 MHz, 120/230/277 VAC, < 1/2 W

Price: loading
Product Information:

Additional Specifications

Decora® LevNet RF™ WSS20-G9N

The LevNet RF™ Decora® Rocker 902MHz Wall Switch Receiver (WSS20) features a robust rocker (return-to-neutral) manual switch used to toggle the lighting load ON or OFF. Using EnOcean® technology, but upgraded to the proven 902MHz radio frequency, the WSS20 leads the industry in quality and reliability. The WSS20 is compatible with all Leviton 902 MHz EnOcean-enabled self-powered transmitters. The WSS20 is the optimal solution for retrofit applications where incandescent, fluorescent and low-voltage lighting controls are required. The WSS20 replaces a traditional single-pole wall switch and fits in a standard single-gang wall box. No additional wiring is required.

LevNet RF™ Decora® RF Receiver Switch, 902 MHz, 120/230/277 VAC Control, < 1/2 W, Wall, 32 to 104 deg F Operating, Environmental Conditions: 0 to 95% Non-Condensing RH, 2.69 in H x 1.66 in W x 1.34 in D

Environmental Conditions      :      0 to 95% Non-Condensing RH
Operating Temperature      :      32 to 104 deg F
Frequency Rating      :      902 MHz
Dimensions      :      2.69 in H x 1.66 in W x 1.34 in D
Warranty      :      5 Years
Mounting      :      Wall
Control Voltage Rating      :      120/230/277 VAC
Power Consumption      :      < 1/2 W
  • Decora® design aesthetics - intuiative rocker switch with return-to-center design
  • No new wiring required - the LevNet RF wall switch receivers simply replaces the existing light switch and communicates with self-powered switches and sensors via radio 902 MHz frequency
  • Vacancy switching - provides pushbutton manual-ON/off light switching of each light load at any time
  • Maximize energy savings - when paired with LevNet RF™ PIR occupancy sensor, the LevNet RF™ wall switch receivers contain all sensor settings
  • Manual-ON/auto-ON, auto-ON/auto-OFF, walk through timer, auto time out selections of 2 minutes for testing (10/20/30 minutes)
  • Allows flexibility and customized adjustments to maximize energy savings
  • Presentation/viewing mode - turn lights off and keep them off while room is occupied (i.e. for slide or film presentations), automatically returns to normal when manually switched back on or room becomes vacant and time delay expires
  • Walk-thru feature - maximizes energy savings by assuring a 2.5 minute time out if motion is not present after 2.5 minutes in auto-ON mode
  • Standard size for seamless installation - LevNet RF wall switch receivers fit in a standard single gang wall box
  • Required wiring - neutral and non-neutral models available, non-neutral requires 25 W minimum load
  • Zero-cross relay - switches at the zero crossing point of the AC power curve to ensure maximum contractor life and compatibility with electronic ballasts
  • Energy savings and efficiency - lowest power consumption of any RF device - < 1/2 W per 120 V device and < 2/3 W per 277 V device annually - approximately 70% savings over other RF devices
  • Air gap switch - assures A/C power disconnects for safety on no neutral switch
  • 10 A load rating - for commercial lighting circuits
  • EnOcean® technology enabled - for LevNet RF™ communication from self-powered lighting controls
  • Stores up to 20 transmitter IDs
  • 50 to 150 ft range
  • Form C latching relay output channels
  • Rocker, momentary and toggle button pairing modes
  • 30 seconds vacancy confirmation
  • 800 W at 120 V incandescent, 1200 VA at 120V, 2700 VA at 277 V fluorescent ballasts, 400 W at 120 V LED, 1/4 hp at 120 V motor and 25 W minimum load required (non-neutral)
  • Line - black, load - blue and neutral - white wire designation