King Electrical 4K2410BW

King Electrical K Convection Electric Baseboard Heater, 240 V, 4.2 A, 1000 W

Price: loading
Product Information:

Additional Specifications

King Electrical 4K2410BW

Baseboard heaters are an economical way to provide heat. They are typically used in apartment construction and other rental properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Standard color is almond. Special colors available. Customer must provide sample or color chip at time of order. Due to the King painting system an exact color match is not guaranteed.

king Electric Baseboard Heater, Convection, Series: K, 240 V, 4.2 A, 1000 W, Wall Mount, Steel, Bright White, Baked Enamel, 4 ft L x 6-3/4 in H x 3-1/8 in D

Amperage Rating      :      4.2 A
Material      :      Steel
Series      :      K
Power Rating      :      1000 W
Type      :      Convection
Mounting Type      :      Wall
Finish      :      Baked Enamel
Color      :      Bright White
Dimensions      :      4 ft L x 6-3/4 in H x 3-1/8 in D
Voltage Rating      :      240 V
  • pdf Brochure-1 https://www.turtle.com//ASSETS/DOCUMENTS/ITEMS/EN/King_2K1205BW_Brochure.pdf
  • pdf Catalog-1 https://www.turtle.com//ASSETS/DOCUMENTS/ITEMS/EN/King_PAW2022_Catalog.pdf
  • pdf Warranty https://www.turtle.com//ASSETS/DOCUMENTS/ITEMS/EN/King_PAW2022_Warranty.pdf
  • Convection heat, quiet running, back wire design, built-in cable clamps
  • Crushproof element, all aluminum element design
  • Full length safety cutout
  • Reinforced cover, soft contoured corners
  • All knockouts are 7/8 in diameter for 1/2 conduit
  • Removable reflector
  • Optional 18 gauge front cover, 22 gauge electro galvanized steel front cover, 20 gauge electro galvanized steel back can, aluminum element design
  • Single or double pole thermostat
  • For used in apartment construction and other rental properties because of the low initial cost and low maintenance
  • Heaters take room air in the bottom (lower front) and discharge it through the top front, the heaters back, bottom, and top fabricated from electro galvanized 22 gauge steel front panels shall be fabricated from 20 gauge electro galvanized steel, ribbed longitudinally for extra strength and have center support to resist impact loads
  • Heater casing shall have modern rounded ends and corners to provide a smooth appearance and finished with a baked enamel
  • Heater shall be provided with a continuous capillary sensor tube, for thermal protection, extending the full length of the heating element, rated at 175 deg F, and be fail-safe type
  • Heater shall have a 44 cu-in junction box at both ends, furnished with five 1/2 knockouts located on the back, bottom, and side
  • Heater elements shall consist of high quality 80% nickel and 20% chromium alloy resistant wire completely surrounded by magnesium oxide and enclosed and swaged in a rust resistant sheath, ribbon aluminum fining shall be compression welded to the sheathed element to provide chimney type flue for heat transfer
  • Heaters shall be supplied with a one year limited warranty
  • Heaters shall be available in ratings from 375 through 1500 W at 120 V, and 375 to 2500 W at 208-240 and 277 V
  • Heaters shall be available in 187 or 250 W per lineal foot
  • Heaters shall be listed and approved by underwriters laboratories