Problem solving is an opportunity for us to do our best by finding better ways to approach your unique project. We work as a team to build momentum, we tackle every challenge along the way, and we share a clear vision of our mutual success at the end of the road.
As a solutions provider, we have vast technical expertise across several market verticals. We follow a systematic approach to identify customer challenges, develop innovative solutions, and ensure that they are expertly planned and flawlessly implemented.
We live by a set of Core Values, which defines who we are. We pledge to listen, learn and be helpful to every customer need; to act honorably and always deliver as promised. Our teams are dedicated to technical excellence so that we can work intelligently to find the right solutions for our customer's needs.
Baseboard heaters are an economical way to provide heat. They are typically used in apartment construction and other rental properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Standard color is almond. Special colors available. Customer must provide sample or color chip at time of order. Due to the King painting system an exact color match is not guaranteed.
king Electric Baseboard Heater, Convection, Series: K, 240 V, 3.13 A, 750 W, Wall Mount, Steel, Bright White, Baked Enamel, 3 ft L x 6-3/4 in H x 3-1/8 in D
Convection heat, quiet running, back wire design, built-in cable clamps
Crushproof element, all aluminum element design
Full length safety cutout
Reinforced cover, soft contoured corners
All knockouts are 7/8 in diameter for 1/2 conduit
Optional 18 gauge front cover, 22 gauge electro galvanized steel front cover, 20 gauge electro galvanized steel back can, aluminum element design
Single or double pole thermostat
For used in apartment construction and other rental properties because of the low initial cost and low maintenance
Heaters take room air in the bottom (lower front) and discharge it through the top front, the heaters back, bottom, and top fabricated from electro galvanized 22 gauge steel front panels shall be fabricated from 20 gauge electro galvanized steel, ribbed longitudinally for extra strength and have center support to resist impact loads
Heater casing shall have modern rounded ends and corners to provide a smooth appearance and finished with a baked enamel
Heater shall be provided with a continuous capillary sensor tube, for thermal protection, extending the full length of the heating element, rated at 175 deg F, and be fail-safe type
Heater shall have a 44 cu-in junction box at both ends, furnished with five 1/2 knockouts located on the back, bottom, and side
Heater elements shall consist of high quality 80% nickel and 20% chromium alloy resistant wire completely surrounded by magnesium oxide and enclosed and swaged in a rust resistant sheath, ribbon aluminum fining shall be compression welded to the sheathed element to provide chimney type flue for heat transfer
Heaters shall be supplied with a one year limited warranty
Heaters shall be available in ratings from 375 through 1500 W at 120 V, and 375 to 2500 W at 208-240 and 277 V
Heaters shall be available in 187 or 250 W per lineal foot
Heaters shall be listed and approved by underwriters laboratories
Availability By Branch
An Email Id is required to process your orders. Please enter your email id and click update.