Johnson Controls EP-8000-2

TRANSDUCER PNEU HIGH VOL 25 PSI ELEK

Price: loading
Product Information:

Additional Specifications

Johnson Controls EP-8000-2

The EP-8000 electro-pneumatic transducer converts a 0 to 10 VDC or 4 to 20 mA signal from an electric controller into a proportional pneumatic output signal. These transducers are grouped into two basic versions: low-volume output units (non-relay) and high-volume output units (relay). Typically used with pneumatic valve or damper actuators. Sequencing can be provided through a Johnson Controls V-9502 valve actuator positioner or D-9502 damper actuator positioner.

Johnson Controls Pneumatic Transducer, Electronic, High Volume Output, 25 psi Safe Air, 0.5 to 19 psi Control Air, 5/32 in or 1/4 in Barb Air Connection, 122 deg F Ambient, 0 to 10 VDC, 0.5 to 19 psi Output, 5 in H x 3 in W x 3 in D Dimensions

Air Connection      :      5/32 in or 1/4 in Barb
Ambient Temperature      :      122 deg F
Safe Air Pressure Rating      :      25 psi
Output      :      High Volume
Item Name      :      Pneumatic Transducer
Voltage Rating      :      0 to 10 VDC
Control Air Pressure Rating      :      0.5 to 19 psi
Dimensions      :      5 in H x 3 in W x 3 in D
Type      :      Electronic
Output Pressure      :      0.5 to 19 psi
  • pdf Spec Sheet https://www.turtle.com//ASSETS/DOCUMENTS/ITEMS/EN/JohnsonControls_EP80002_Spec_Sheet.pdf

EP-8000 series electro pneumatic transducers convert a voltage or current signal from an electronic controller into a pneumatic output pressure signal. An increase or decrease in the input signal proportionally increases or decreases the output pressure signal from the EP-8000. Four models are available, which are grouped into two basic versions low-volume output units and high-volume output units.

  • Compact, simple design eases installation on a variety of mounting surfaces, including direct mounting on pneumatic valve actuators
  • Interfaces with a wide range of controllers, making the unit ideal for retrofit installations
  • Hypodermic needle test point allows for fast and easy output pressure signal measurement
  • Factory set, fully adjustable zero and span facilitates field calibration, saving installation costs
  • High accuracy with low hysteresis provides many years of use with less time spent on maintenance