Killark® UGP-20231

Killark® UGP-20231

PLUG 120 VAC 20 A 2 3 GRA STR BL UGP

Price: loading
Product Information:

Additional Specifications

Killark® UGP-20231

Killark® Plug, Straight Blade, Series: UGP, 120 VAC, 20 A, 1 hp, 60 Hz Frequency, 2 Pole, 3 Wires, NEMA 3/4/4X, Copper Free Aluminum, Gray, 6-5/8 in L x 2-3/8 in W X 1-7/8 in H Dimensions

Amperage Rating      :      20 A
Material      :      Copper Free Aluminum
Series      :      UGP
Horsepower      :      1 hp
Number of Wires      :      3
Frequency Rating      :      60 Hz
Item Name      :      Plug
Number of Poles      :      2
NEMA Rating      :      NEMA 3/4/4X
Color      :      Gray
Dimensions      :      6-5/8 in L x 2-3/8 in W X 1-7/8 in H
Type      :      Straight Blade
Voltage Rating      :      120 VAC

The ACCEPTOR® UGP-QW / UGR-QW Plug and Receptacle system, with its unique patented design, is interchangeable with other NEMA bladed type explosion-proof and dust ignition proof devices. Plugs and receptacles may be used where bladed devices are needed in locations made hazardous by the presence of flammable gases or vapors, combustible dusts or easily ignitable fibers and flyings. Quick-Wire terminal construction allows for easier installation than traditional methods, allowing for labor savings and higher customer satisfaction. Plug can serve to provide power for portable equipment used in both hazardous and non-hazardous areas. Factory sealed construction specifies that no additional external seals are required (except in Group B applications).

  • Factory sealed chamber in UGR receptacle contains switch’s arcing components
  • Spring loaded receptacle cover closes when plug is removed
  • Copper-free aluminum (less than 4/10 of 1%) alloy resists corrosion
  • Electrostatically applied and baked powder epoxy/polyester finish
  • Acceptor® plugs conform to NEMAconfigurations, while it's “turn to engage” feature locks in plug and can be used to prevent accidental disengagement of critical equipment
  • Acceptor plugs conform to NEMA configurations and can be used with standard receptacles in non-hazardous areas to maximize equipment utilization. The system's "turn to engage" feature locks in plug and can be used to prevent accidental disengagement

Standards/Certifications: Class I, Divisions 1 & 2, Groups C, D, Class I, Zones 1 & 2, Groups IIB, IIA, Class II, Divisions 1 & 2, Groups F, G, Class III, Divisions 1 & 2, UL Listed, CSA Certified

Applications: For Petroleum Refineries, Chemical Plants, Wet/Damp Areas, Corrosive Environments, Petroleum Plants, Grain Elevators/Feed Mills, Flour and Feed Mills, and indoor or outdoor locations, for use with type S/SO/ST/STO heavy duty cord