Dopag 450.10.06

Dopag 450.10.06

VALVE MTR 1/8 IN 40 TO 80 BARS GRS

Price: loading
Product Information:

Additional Specifications

Dopag 450.10.06

The valve is in the initial position when the control pressure applied on the compressed-air connection. The valve needle in the control valve is in the upper position, thus closing the material outlet. The material access to the metering chamber is open. The material enters the control valve by means of the material pressure and flows into the metering chamber. Due to the contact surface of the piston, the piston executes an upward stroke. The metering chamber fills up automatically to the pre-defined volume. Material is metered when the compressed air connection of the valve is charged with compressed air. The valve needle executes a downward stroke, thus closing the material access to the metering chamber. The material outlet opens. The material pressure has an effect on the piston step, which enters the metering chamber and feeds the material to the material outlet. An accurate metering volume is discharged. The snuff back effect carried out during the refilling, prevents the material from dripping after metering is finished.

  • Double acting chamber metering valve
  • High maximum working pressure
  • Low maintenance
  • Snuff back effect to prevent material dripping
  • Application: For metering shot or dot applications
  • Dopag Metering Valve, 1/8 in Nominal, 40 to 80 bars, Media: Grease, 68 mm L x 30 mm W x 151 mm H

    Media      :      Grease
    Dimensions      :      68 mm L x 30 mm W x 151 mm H
    Pressure Rating      :      40 to 80 bars
    Nominal Size      :      1/8 in