LMR® C19M10-80-002

LMR® C19M10-80-002

LMR® C19M10-80-002 Type LMR-195 Conversion Cable, Aluminum Conductor, 1000 VDC

Price: loading
Product Information:

Additional Specifications

LMR® C19M10-80-002

ProSoft Technology supplies cables that provide the lowest attenuation and are pre-cut and assembled with connectors at the factory to ensure ultimate reliability and customer satisfaction. LMR® 195 Cables are ideal for jumper assemblies in wireless communication systems and short antenna feed runs.

LMR® Conversion Cable, Type LMR-195, 1000 VDC, Aluminum Conductor, Polyethylene, Black, -40 to 85 deg C

Temperature Rating      :      -40 to 85 deg C
Voltage Rating      :      1000 VDC
Warranty      :      3 Years
Type      :      Type LMR-195
Jacket Material      :      Polyethylene
Conductor Type      :      Aluminum
Jacket Color      :      Black
  • With a 1/2 in minimum bend radius, the LMR® 195 cable is substantially more flexible than RG142 and very comparable to RG58
  • LMR® 195 boasts lower loss than other RG58/RG142 type cables
  • Achieved through the use of high velocity gas-injected closed cell foam dielectric, and bonded aluminium tape outer conductor
  • The UV protected black polyethylene jacket makes the cable rugged and resistant to the full range of outdoor environments
  • The bonded aluminium tape outer conductor is overlapped to provide 100% coverage, resulting in 0.90 dB RF shielding
  • The intimately bonded structure and foam dielectric of LMR® cables provide excellent phase stability over temperature and with bending
  • The high velocity dielectric results in superior phase stability as compared with RG58 and RG142 solid dielectric cables
  • Industrial data communications experts who understand your protocols, devices, and applications
  • 29.9 dB/100 ft attenuation at 5800 MHz, 18.8 dB/100 ft attenuation at 2450 MHz, 11.2 dB/100 ft attenuation at 915 MHz
  • -70 to 85 deg C storage temperature range, -40 to 85 deg C installation temperature range
  • 2.5 kW peak power
  • 3000 VRMS jacket spark
  • 0.5 in minimum bend radius
  • RP SMA Plug to N Plug
  • 0.2 ft lbs bending movement
  • 40 lbs tensile strength
  • 15 lb/in flat plate crush
  • LMR® 195 type conversion cable with reverse polarity, right angle SMA male type connector on radio side and standard N bulkhead connector on antenna side
  • Converts SMA connector type to N bulkhead and normally attaches to extension cable on outside of enclosure for indoor applications